Related Resources: hardware

Internal Thread Dimensions for Class 5 Interference-Fit Threads

ANSI ASME Hardware Design Guide

Internal Thread Dimensions for Class 5 Interference-Fit Threads ANSI/ASME B1.12-1987 (R1998). The following thread detail specifiactions are typical for studs applications.

Data within design chart is based on internall threaded members being steel ASTM A-325 (SAE Grade 5) or better. Le = length of engagement.

The following thread designations are used on engineering drawing spcifications to distinguish the American Standard Class 5 Threads from the tentative Class 5 and alternate Class 5 threads, specified in Handbook FED H28.

They also distinguish between external and internal American Standard Class 5 Threads.

Class 5 External Threads are designated as follows:

  • NC-5 HF—For driving in hard ferrous material of hardness over 160 BHN.
  • NC-5 CSF—For driving in copper alloy and soft ferrous material of 160 BHN or less.
  • NC-5 ONF—For driving in other nonferrous material (nonferrous materials other than copper alloys), any hardness.

Class 5 Internal Threads are designated as follows:

  • NC-5 IF—Entire ferrous material range.
  • NC-5 INF—Entire nonferrous material range.
Nominal Size
NC-5 IF
Ferrous Material
NC-5 INF
Nonferrous Material

Pitch
Diameter

Major
Diameter
Minor
Diameter
Tap Drill
Minor
Diameter
Tap Drill
Min
Max
Min
Max
Min
Max
Min
.2500–20
.196
.206
.2031
.196
.206
.2031
.2175
.2201
.2532
.3125–18
.252
.263
.2610
.252
.263
.2610
.2764
.2794
.3161
.3750–16
.307
.318
.3160
.307
.318
.3160
.3344
.3376
.3790
.4375–14
.374
.381
.3750
.360
.372
.3680
.3911
.3947
.4421
.5000–13
.431
.440
.4331
.417
.429
.4219
.4500
.4537
.5050
.5625–12
.488
.497
.4921
.472
.485
.4844
.5084
.5124
.5679
.6250–11
.544
.554
.5469
.527
.540
.5313
.5660
.5702
.6309
.7500–10
.667
.678
.6719
.642
.655
.6496
.6850
.6895
.7565
.8750– 9
.777
.789
.7812
.755
.769
.7656
.8028
.8077
.8822
1.0000– 8
.890
.904
.8906
.865
.880
.8750
.9188
.9242
1.0081
1.1250– 7
1.000
1.015
1.0000
.970
.986
.9844
1.0322
1.0381
1.1343
1.2500– 7
1.125
1.140
1.1250
1.095
1.111
1.1094
1.1572
1.1631
1.2593
1.3750– 6
1.229
1.247
1.2344
1.195
1.213
1.2031
1.2667
1.2738
1.3858
1.5000– 6
1.354
1.372
1.3594
1.320
1.338
1.3281
1.3917
1.3988
1.5108

Related: