Replies to this message

Re: Industrial Convection and Infrared curing/drying oven design
Re: Industrial Convection and Infrared curing/drying oven design -- jServ	Post Reply	Top of thread	Forum

Posted by: senator46xxx ® 05/22/2007, 15:38:37 Author Profile eMail author Edit

Ovens of this type are common and are made by many manufacturers. conveyorized (belt ) ovens often use Teflon (PTFE) coated fiberglass belts. The belts are open mesh to allow air to circulate. heat source can be forced (circulating) hot air, infrared or UV or a combination. PTFE / fiberglass belts will take up to 500 F . These belts are not typically used to support the product during the actual painting process. The product is placed on the belt after the finish is applied.

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

Re: Industrial Convection and Infrared curing/drying oven design
Re: Industrial Convection and Infrared curing/drying oven design -- jServ	Post Reply	Top of thread	Forum

Posted by: jboggs ® 04/20/2007, 18:01:41 Author Profile eMail author Edit

Your most valuable resource will be the manufacturers and vendors currently in the field. Do some research there, talk to their applications folks, read their literature. You'll learn stuff.

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

| |