Re: Hole Position to -A- only

Re: Hole Position to -A- only
Re: Hole Position to -A- only -- Joe	Post Reply	Top of thread	Forum

Posted by: John-Paul Belanger

12/11/2002, 20:52:33

Edit

First, I assume you mean that the hole intersects with datum A. In that case you cannot position a single hole to the datum, since there really is no distance from the hole's axis to datum A. But this idea of a single datum does work when positioning a pattern of holes -- because you are positioning the holes to each other, and then datum A would control perpendicularity. (Even back to your classic example of positioning a hole to datums A, B, and C, the "A" datum really only controlled perpendicularity.)

Post Reply | Recommend | Alert

Rate

Where am I? Original Top of thread