HIGH PRESSURE/HIGH TEMPERATURE PUMP MANUFACTURER
Post Reply   Forum
Posted by: jayanthijags ®
Tweety Bird
01/30/2007, 23:50:15

Author Profile
eMail author
Edit

We are in need of a centrifugal pump which has following parameters:
Fluid = Demineralised water,
Q = 36 m3/hr, H = 40 mlc, T = 250 deg C, Opr Pr = 47.5 Kg/cm2, Design Pr = 66 Kg/cm2, Sp.GR = 0.83, This pump is required for the circulation of water in boiler circuit. We have not been successful in locating manufacturer of such high pressure/high temperature pumps. we invite suggestion on the likely manufacturer who can be approached for the supply of the pump.







Post Reply
Tell a Friend (must be logged in)
Alert Admin About Post
 

Powered by Engineers Edge

© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved.  Disclaimer