Replies to this message

Re: design a hydrulic scissor lift
Re: design a hydrulic scissor lift -- mmkk	Post Reply	Top of thread	Forum

Posted by: randykimball ® 10/28/2006, 21:44:25 Author Profile eMail author Edit

This request comes up often, the thing is a scissor lift can be a complex thing to design. The best thing to do is find one on th market. For the size you are thinking, perhaps one of those rental scissor lifts intended to support men and equipment while they are doing overhead work from a rental supply that has major chassis problems. They can be driven and operated from the scissor platform, these operator stations and drive trains tend to go bad leaving a good scissor lift with no drive-ability. Thus the scissor portion could be removed or altered to do the job. Check with major local rental companies and see when one will be auctioned away. You can often leave a name and number that they put with the rental equipment data and will call you when one is up to do away with. The worst suggestion of your lifetime may be the catalyst to the grandest idea of the century, never let suggestions go unsaid nor fail to listen to them. Modified by randykimball at Sat, Oct 28, 2006, 21:45:42

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

| |

Re: Re: design a hydrulic scissor lift
Re: Re: design a hydrulic scissor lift -- randykimball	Post Reply	Top of thread	Forum

Posted by: Kelly Bramble ® 10/29/2006, 15:17:30 Author Profile eMail author Edit

Hot off the keyboard! /mechanics_machines/scissor-lift.htm

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread