Replies to this message

Re: 22x1mm Jam Nut
Re: 22x1mm Jam Nut -- dkeilholz	Post Reply	Top of thread	Forum

Posted by: Kelly Bramble ® Administrator, Administrator 10/02/2006, 13:55:16 Author Profile eMail author Edit

Do you have a mil, din or other specification?

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

| |

Re: Re: 22x1mm Jam Nut
Re: Re: 22x1mm Jam Nut -- Kelly Bramble	Post Reply	Top of thread	Forum

Posted by: dkeilholz ® 10/02/2006, 15:35:12 Author Profile eMail author Edit

No. Will be using it to lock a panel mount connector to a plastic bezel/housing. Thanks.

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread

| |

Re: Re: Re: 22x1mm Jam Nut
Re: Re: Re: 22x1mm Jam Nut -- dkeilholz	Post Reply	Top of thread	Forum

Posted by: Kelly Bramble ® Administrator 10/02/2006, 16:28:09 Author Profile eMail author Edit

? All off-the-self fasteners (nuts, screws, ect..) are manufactured to some industry standard. You might try looking in machinery's or other book to identify the jam nut you are looking for, then determine which industry standard the hardware is manufactured to. Realy, even Home Depot nuts are manufactered to some industry standard.... From there, you can search the internet. Modified by Kelly Bramble at Mon, Oct 02, 2006, 16:29:51

Post Reply Tell a Friend (must be logged in) Alert Admin About Post

Where am I? Original Top of thread