Membership Services

Re: Torque eqn

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">Cragyon on December 06, 2001 at 19:25:03:

In Reply to: Torque eqn posted byMike on December 06, 2001 at 18:33:59:

: Can anyone refer me to an equation, that will calculate the torque to lift a certain load, 7500 lbs, for a 1.5"-12 UNF stud and nut combination.

Mike,

Use the torque calculator here on the E Edge /torque_calc.htm .

The "Clamp" force is the force to lift the load.

Follow Ups

Subject: Re: Re: Torque eqn

Comments:: : Can anyone refer me to an equation, that will calculate the torque to lift a certain load, 7500 lbs, for a 1.5"-12 UNF stud and nut combination. : Mike, : Use the torque calculator here on the E Edge /torque_calc.htm . : : The "Clamp" force is the force to lift the load.

[ Home ][ Forum Archive ] [ Active Engineering Forum ]