Re: AIRCRAFT GRADE BOLTS VS SAE GRADE


[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">Randy Kimball on May 13, 2002 at 20:48:45:

In Reply to: AIRCRAFT GRADE BOLTS VS SAE GRADE posted bymark kohut on May 09, 2002 at 11:33:19:

Mark,
Building an airplane you are (should) required to aircraft bolts for another important reason. The marterial and screw works can be traced back to the very area on the mine ir was all mined at. The material at the foundry was tested and certified and every stage along the way was certified. This is you best protection against a bad batch of material or heat treat being the source of a failure crash.
Aircraft screws and bolts are certified, and tracable. ....



Follow Ups



Subject: Re: Re: AIRCRAFT GRADE BOLTS VS SAE GRADE

Comments:

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved.  Disclaimer