Re: Re: Pressure Vessel


[ Home ][ Forum Archive ] [ Active Engineering Forum ]

Posted By<" ">Peter on May 08, 2002 at 15:45:03:

In Reply to: Re: Pressure Vessel posted byCT Rogers on December 08, 2001 at 09:17:35:

This equation appears to be a derivative of the basic equation for "hoop" stress in a THIN-walled
cylinder (t = P*r/omega) where P is internal pressure, r is the mean radius of cylinder and omega is resulting hoop(circumferential)stress. The addition of the "S*E" term acts to increase the required thickness as your E (efficiency) is lowered. The - "P*E" term can be considered a factory of safety and has the same effect.
.


Follow Ups



Subject: Re: Re: Re: Pressure Vessel

Comments:

[ Home ][ Forum Archive ] [ Active Engineering Forum ]

© Copyright 2000 - 2024, by Engineers Edge, LLC All rights reserved.  Disclaimer