Membership Services

Re: Re: Re: Gearbox Design

[ Home ][ Forum Archive ] [ Active Engineering Forum ] [ Design & Engineering Data ]

Posted by posted by rabab ahmed saleh on November 30, 2002 at 16:55:11:

: : Anyway you figure it two shafts, six shafts,
: : you have 9 times the torque and a 9-1 gear ratio
: : if you have and input of 1440 RPM into gear reduction
: : box out-putting 160 RPM. 1440/160=9

Follow Ups:

Post a Followup

Subject: Re: Re: Re: Re: Gearbox Design

Comments:
: : : Anyway you figure it two shafts, six shafts, : : : you have 9 times the torque and a 9-1 gear ratio : : : if you have and input of 1440 RPM into gear reduction : : : box out-putting 160 RPM. 1440/160=9

[ Home ][ Forum Archive ] [ Active Engineering Forum ]