Engineers Edge

Needed ASAP
Post Reply
Mechanical Engineering Forum
Posted by: SteveDorsett

08/25/2010, 17:34:56

Author Profile
eMail author

A formulated XCEL or other with a BEND ALLOWANCE for sheet metal ranging from 1/8" to 3/4" with multiple bends.

Lost mine from 4 years ago that allowed up to 4 bends (was an excel file with calculations).

Any help for this would be greatly appreciated.

Post Reply
Tell a Friend (must be logged in)
Alert Admin About Post
  Previous |   |

© Copyright 2000 - 2022, by Engineers Edge, LLC All rights reserved.  Disclaimer