GDand T of slot

[Huong Tran]

slot.jpgHow much movement on "X" ans "Y" of this called out do I have?

[Kelly_Bramble]

X = Left <---> Right

When manufactured @ MMC = 8.7 (9 - 0.3) max position 1.0 = or +/- 0.5 from perfect
When manufactured @ nominal = 9 (9 + 0.0) max position 1.3 = or +/- 0.65 from perfect
When manufactured @ LMC = 9.3 (9 + 0.3) max position 1.6 = or +/- 0.8 from perfect

y = Up and Down

When manufactured @ MMC = 3.7 (4 - 0.3) max position 3.0 = or +/- 1.5 from perfect
When manufactured @ nominal = 4 (4 + 0.0) max position 3.3 = or +/- 1.65 from perfect
When manufactured @ LMC = 4.3 (4 + 0.3) max position 3.6 = or +/- 1.8 from perfect

See and buy: Geometric Boundaries II - ASME Y14.5-2009