Results 1 to 4 of 4

Thread: How do BOSE make these Awesome LEDs?!

  1. #1
    Associate Engineer
    Join Date
    May 2019
    Posts
    1

    How do BOSE make these Awesome LEDs?!

    Hi, I work as a product designer an am trying copy a detail that Bose have on their head phones. Essentially they have what looks like flat black ABS plastic back light with some LEDS. Next to the LED is a printed symbol (Pad printing I think).

    How do they create this clever effect with the LEDs?

    At first I thought the plastic might have been translucent and that the black coating had been printed on the the outside. However, as you can probably see in the image, I tried scratching away on the top black surface to find that it looks like this whole chunk of material is black ABS.

    So how do they get the light through?

    • Is the wall thickness where the LEDs are super thin? But I tried poking the left one and it seems pretty tough.
    • Is there a hole all the way through the black ABS where the LEDs are and they insert some very tight fitting light guides/pipes?

    Any thoughts/comments would be really appreciated. Thanks.
    Greg
    Attached Images Attached Images

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    flexible neon blue light... Search for it
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    They are just an led diode...
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  4. #4
    They do it through light pipes. The LEDs are on a board and the perspex, or whatever, light pipe is shaped so it gathers the light and presents it at the end as you see.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •