Results 1 to 4 of 4

Thread: A rigger looking for help!

  1. #1
    Associate Engineer
    Join Date
    Sep 2016
    Posts
    2

    Confused A rigger looking for help!

    Hi everyone,

    I am hoping you could help me with a formula to find what the lifted load would be when removing a boom and stick from an excavator in one piece? I have the COGs of both components and have calculated the combined COG, I have the measurements from the lift point to COG and fulcrum to COG.

    The formula I have been using is:

    X = X2 x Y2/Y1

    Where:

    X = lifted load
    Y1 = distance from fulcrum to lift point
    Y2 = distance from COG to lift point
    X2 = total weight of object.

    I might be way off here and any help is appreciated. Just trying to get better.

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Yes... that simple equation will help you to locate your lift point relative to the CG.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  3. #3
    Associate Engineer
    Join Date
    Sep 2016
    Posts
    2
    Thanks Kelly....

  4. #4
    Associate Engineer
    Join Date
    Apr 2017
    Posts
    1
    Usually, the excavator boom already has welded lifting hooks in place so you can lift the load in a balanced state.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •