Results 1 to 7 of 7

Thread: Simple doubt about profile.

  1. #1
    Associate Engineer
    Join Date
    Nov 2015
    Posts
    6

    Simple doubt about profile.

    Hello Friends

    Please find the attached excel file.

    As per GD&T Standard profile tolerance will not affect the Worst case boundary (WCB), but the attached file contains 2 example simple problems is include the profile tolerance in WCB.

    Kindly clarify.

    thanks in advance

    thilag
    Attached Files Attached Files

  2. #2
    Associate Engineer
    Join Date
    Nov 2015
    Posts
    6
    The minimum distance for "x" is 5.2 and in other example the worst case outer boundary for the 50.2 basic dimension is 50.4. But my doubt is if profile is not affecting the WCB then how this result is possible.

    thanks

    thilag
    Attached Images Attached Images

  3. #3
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Question 25

    The wall thickness is 6 mm

    Each Profile of surface tolerance is bilateral equal, therefore the thinnest wall is equal to:

    6
    - .6/2
    - 1/2
    _______
    5.2
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  4. #4
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Profile tolerances by default are bilateral equal. Meaning the tolerance boundaries are distributed evenly or symmetrically about the basic dimension location of the concerned surface.

    Second example question ..

    Outer boundary

    50.2
    + 0.4/2
    _________
    50.4




    Inner boundary

    50.2
    - 0.4/2
    _________
    50
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  5. #5
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    The parallelism is ignored because being that it is a orientation tolerance, the tolerance boundaries will always be contained within the tolerance boundaries defined by the profile tolerance.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

  6. #6
    Associate Engineer
    Join Date
    Nov 2015
    Posts
    6
    I already know how the solution arrived. But my question is i learned as Profile will not affect the Worst case boundary, if so then how it is exceeds the basic dimension.

  7. #7
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Quote Originally Posted by thilag View Post
    I already know how the solution arrived.
    No you don't...

    Quote Originally Posted by thilag View Post
    But my question is i learned as Profile will not affect the Worst case boundary.
    "Worst case boundary" is just a referenced size or location of a surface and conceptually is not bound to any particular geometric characteristic or tolerance.


    Quote Originally Posted by thilag View Post
    But my question is i learned as Profile will not affect the Worst case boundary, if so then how it is exceeds the basic dimension.
    A basic dimension does not include a tolerance.. Basic dimension are to be considered tolerance-less or having no variability.


    The Profile of surface specification within the feature control frame defines the tolerance boundaries. Those tolerance boundaries are LOCATED bilateral equal or symmetrical about the surface located by the basic dimension.
    Tell me and I forget. Teach me and I remember. Involve me and I learn.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •