Results 1 to 4 of 4

Thread: Feature control frames on metric prints

  1. #1
    Associate Engineer
    Join Date
    Nov 2013
    Posts
    4

    Feature control frames on metric prints

    I am seeing a lot of metric prints that have other than the standard GD&T symols in the feature control frames and dimension call outs. Examples: A "r" in the feature control frame. I take it to mean the same as concentricity but not really sure. An "n" in front of a diameter call out. Is there a web sight I can go to that would explain these and others.

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    You can get help here, however your descriptions are vague..

    Post an image of the features control frame in question (Tolerance Frame) and we'll take a look.

  3. #3
    Project Engineer
    Join Date
    May 2011
    Location
    Michigan
    Posts
    78
    It might just be a translation error -- such as when AutoCad dwg or other format is converted to a PDF, etc.

  4. #4
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Quote Originally Posted by Belanger View Post
    It might just be a translation error -- such as when AutoCad dwg or other format is converted to a PDF, etc.
    That's probably what is going on. The translation was done without the fonts embedded into the PDF file as well as the op does not have the specific fonts on their computer.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •