Results 1 to 3 of 3

Thread: Hybrid vehicle layout help

  1. #1

    Hybrid vehicle layout help

    Hi guys,There's a project on hybrid vehicles, and the task is to design and simulate a hybrid vehicle: we have started on the basics, and have come up with a small layout as to how the hybrid will look like. Our main concern is whether the layout will work just with the epicyclic transmission, with the connections shown in the picture attached, also how do you select the clutch and how do you decide on how to operate the hybrid at an efficient operating range of the engine? Another question is how do you decide on how much capacity the battery should have with respect to 'motor power' and 'vehicle weight' considerations.Guys please guide me on how to go about designing such a hybrid vehicle. The objective is load carrying through short distances in cities, at city speeds.Thanks in advance.
    Attached Images Attached Images

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    The clutch is designed and selected based on engine loading requirements.

    See attached images for ideals.

    hybrid.jpg
    hybrid2.jpg

  3. #3
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •