Results 1 to 3 of 3

Thread: Choosing the silicon layer thickness

  1. #1
    Isy
    Guest

    Choosing the silicon layer thickness

    Hi I'm new here studying a solar engineering course. I'm not sure that's my question fit here but i'm ready for moving it .
    I've to choose an optimized thickness for a layer cell, seemed to me simple by using Lambert formula but they are giving me datas on others parameters and i started to doubt that it was so simple
    Here is the prob
    Solar3.jpg
    I'll appreciate if someone could help me with that not to give me the answer but the path to resolve it
    Thx

  2. #2
    Lead Engineer Cake of Doom's Avatar
    Join Date
    Aug 2012
    Location
    UK
    Posts
    433
    Seems to me that it is as simple as you first thought. I think the other values have been included to get you thinking about the quality of the material you're working with rather than an "ideal situation" where everything is perfect because it makes the numbers a bit easier.

    I would also get a second opinion though.

    Good luck.

  3. #3
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Well, looks like this maybe a homework problem as the math or concepts needed for calculation "Beer-Lamberts Law" is quite complex...

    See:

    Beer–Lambert law.pdf

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •