Results 1 to 2 of 2

Thread: Datums on drawings

  1. #1
    Senior Engineer
    Join Date
    Apr 2011
    Location
    Monclova, Coahuila, Mexico
    Posts
    39

    Datums on drawings

    I have seen many drawings in my others jobs but this is the first time that I've seen drawings with the same datum but in diferent origins what I was known is that when a Datum is used this must be located only in a origin right now I have a information in a drawing that is showing th same Datum in both sides imagine that you need to built a car and the drawing to built it is showing a Datum A on fog left and right is correct?

    thanks,

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    Quote Originally Posted by Dominguez Mexico View Post
    I have seen many drawings in my others jobs but this is the first time that I've seen drawings with the same datum but in diferent origins what I was known is that when a Datum is used this must be located only in a origin right now I have a information in a drawing that is showing th same Datum in both sides imagine that you need to built a car and the drawing to built it is showing a Datum A on fog left and right is correct?

    thanks,
    It would be helpfull if you could post a picture of the drawing on this forum. A datum feature can be a single surface element, a collection of surface features or a feature of size.

    I do need to see the exact application to give you interpretation.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •