Results 1 to 5 of 5

Thread: Rectangular Pressure Vessel with horizontal welded stiffeners

  1. #1
    Engineer
    Join Date
    Apr 2013
    Location
    Canada
    Posts
    12

    Rectangular Pressure Vessel with horizontal welded stiffeners

    I'm running additional calculations besides the cylindrical pressure vessel calculations I posted earlier. I'm examining a pressure vessel with angle iron stiffeners that wrap around the entire vessel horizontally. There are several stiffeners that span the length of the vessel. I need to perform stress analysis on the stiffeners and the sections of the vessel's side in between the stiffeners. I cannot seem to find any literature associated with this specific format of stiffener online. The stiffeners will be welded to the surface of the vessel, which is of rectangular shape. Any help or advice on the calculations would be appreciated.

  2. #2
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    ASME Boiler and Pressure Vessel Code (BPVC)...

  3. #3
    Technical Fellow jboggs's Avatar
    Join Date
    Mar 2011
    Location
    Myrtle Beach, SC
    Posts
    908
    cr668288,

    There is a very good reason that you have never, ever seen a rectangular pressure vessel.

    Just sayin...

    JB

  4. #4
    Engineer
    Join Date
    Apr 2013
    Location
    Canada
    Posts
    12
    The calculations I'm running are for dust collectors, which are generally rectangular in shape and have stiffeners added to the sides for strengthening. I apologize for not stating that in the original post.

  5. #5
    Engineer
    Join Date
    Apr 2013
    Location
    Canada
    Posts
    12
    None of my calculations are being used in actual design. I am a student engineer who has been asked to research into how these devices are designed. I am not a professional and I'm merely performing calculations for a firm that I'm currently doing a work term with. Everything is being reviewed by professional engineers before being presented in any report or otherwise. All of my questions are merely to understand the theory behind the designs of pressure vessels; dust collectors specifically. Any help with this is appreciated.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •