Results 1 to 2 of 2

Thread: inspection method of a machined part

  1. 03-23-2013, 01:49 AM #1
    jhanani kannan
    jhanani kannan is offline
    Associate Engineer
    Join Date
    Mar 2013
    Posts
    2

    Unhappy inspection method of a machined part

    can you let me clarify what can be the flatness of a plane if the parallelism is 10 Microns and their thickness is around 3 mm
    Reply With Quote Reply With Quote
  2. 03-23-2013, 05:06 PM #2
    Kelly_Bramble
    Kelly_Bramble is offline
    Technical Fellow Kelly_Bramble's Avatar
    Join Date
    Feb 2011
    Location
    Bold Springs, GA
    Posts
    2,625
    For that surface which the parallelism id defined, the allowed flatness will not be greater than 10 Microns.
    Reply With Quote Reply With Quote
« inspection method of a machined part | Need Assistance on Shoulder Bolt Design »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules