- Engineers Edge Dimensioning and Tolerancing Forum Archive
- Need some action folks...
- Baseline or chain dimensioning (Para 5.2.2 from 1994 removed in 2009)
- true position of Slot
- Primary Datum
- Tolerances of Thread Feature
- re.position tolerance datum callout doubt
- Circularity / Roundness
- Hole Positiona tolerance
- Datums on drawings
- Thru holes in a hollow cylinder (pipe, tube, or hollow shaft)
- Direction to tap thread?
- Holes in-line
- Spline inspection by CMM - Fourier Series
- A Level engineering help???
- Target datums ?
- Difference in SPF output in ISO1101 and ASME 14.5
- Open tolerance for drawing
- Using a profile dimension with a basic dimension to control a radius
- Basic vs. TED
- Wall Thickness Variation - GD&T
- Overriding the Envelope Requirement in ISO GPS
- Hole Tolerance for Press Fit dowel Pin
- Faro Arm vs CMM (Aerospace)
- GDand T of slot
- Number of decimal points for a spec?
- Profile of a Surface
- Having trouble with size
- Diameter vs height
- MAX Dimensions
- Callout for hole pattern on variable thickness
- Dowel Pin Tolerance Charts V Dia?
- Composite called out
- Aluminum Casting acting gooey
- Use of "TYP" in drawings
- Aluminum Pulley and Steel C3 bearing
- Cruce de tolerancias
- Philosophy of Determining CPK for a flatness tolerance.
- center of a irregular circle
- True Position callout
- Meaning of a radial tolerance
- Notes on Prints
- Dimond Shape on print
- Runout or Concentricity
- Diametrical True Position with Zero Tolerance
- LMC-Least Material Condition
- Tolerance of holes shown on centerlines
- Measurment Discrimination
- composite profile tolerance
- Angularity Tolerance
- How do I calculate a position with only a width of a spline and angle between splines
- Double up with tolerances
- LMC applied to threaded holes
- Iso metric Screw M8 Major Diameter Tolerance
- Profile tolerance Question
- Double Plus or Minus Tolerances
- Hello, Just Joined
- GD&T question
- How to control the Size and Position of 2 Very Odd Openings
- True positional call out
- Is it acceptable to tolerance the same diameter feature with two tolerances?
- True Position of a diameter back to 2 datums.
- torque vs thread engagement
- Flatness with Datum Alternative
- Drilled Hole positioning query on threaded bolt
- True position to holes on not datum surfaces... is this allowed
- features on a common centerline with no positional tolerance
- Composite tolerancing of features on a cylinder
- True position question - hole on angle
- stated accuracy of portable CMM arm and real world usage
- Feature control frames on metric prints
- tolerance with MMC
- True Position on CMM result vs Equation
- ASME Y14.5-2009, Geometric Boundaries II GD&T Reference Book
- GD&T Training ASME and ISO Standard Onsite
- Review Current GD&T Theory and Inspection Data Algorithms
- Hole positions with different tolerances that are in the same line?
- Runout tolerance measuring device
- Dimensioning angled feature
- Complicated Parallelism Question
- All About Optical Flats
- Quick question about ISO tolerances (H7)
- MMC and RFS in same feature control frame
- Choosing Geometric Dimensioning and Tolerancing GD&T Tool
- Is it legal to use a Centerline as a Datum Feature?
- Runout Inspection between Hole and Arc
- Datum feature on one side of an extruded shape?
- Datums call out @ part center is correct?
- Parallelism between an axis and a plane
- Apply GD&T on Threaded Feature?
- GD&T Spherical Radius
- Inline Keyways
- Company Standards - misapplication of GD&T?
- Japanese GD&T standard?
- Need Help Interpreting angles called out in minutes and seconds
- Tolerance for Valve seat
- Question about tolerances in plastic extruded parts
- Help with identifying datums
- Profile of Surface vs Profile of Line
- position control of hole pattern without datum & modifier