Perpendicular Groove Plug Weld Joint Calculation
The following equation will determine the perpendicular Shear Stress in groove or slot weld base area as well as the Shear Stress in Peripheral Area.
Shear Stress in Weld Base Area
| Where: | |
|
|
= Shear stress in weld base area [MPa,psi] |
|
F |
= Shear force [N, lb] |
|
b |
= Width of weld [mm,in] |
| L | = Length of weld [mm,in] |
|
i |
= Number of welds |
Shear Stress in Weld Peripheral Area
| Where: | |
|
|
= Shear stress in weld peripheral area [MPa,psi] |
| F | = Shear force [N, lb] |
| s | = Plate thickness [mm, in] |
| L | = Length of weld [mm,in] |
| i | = Number of welds |
Link to this Webpage:
© Copyright 2000 -
2024, by Engineers Edge, LLC
www.engineersedge.com
All rights reserved
Disclaimer |
Feedback
Advertising
| Contact
