Cone Head Rivet Engineering Data Chart ASME B18.1.1
AMERICAN STANDARD SMALL SOLID RIVETS
For a comprehensive set of specs, see ANSI/ASME Standard #ASME B18.1.1-1972 (R1995)
All units in Inches
Cone Head Rivet
| BASIC DIAMETER | A Major Head Diameter | B Minor Head Diameter | H Head Height |
| .5 | 0.8750 | 0.4690 | 0.4380 |
| .625 | 1.0940 | 0.5860 | 0.5470 |
| .75 | 1.3120 | 0.7030 | 0.6560 |
| .875 | 1.5310 | 0.8200 | 0.7660 |
| 1 | 1.7500 | 0.9380 | 0.8750 |
| 1.125 | 1.9690 | 1.0550 | 0.9840 |
| 1.25 | 2.1880 | 1.1720 | 1.0940 |
| 1.375 | 2.4060 | 1.2900 | 1.2030 |
| 1.5 | 2.6250 | 1.4060 | 1.3120 |
| 1.625 | 2.8440 | 1.5240 | 1.4220 |
| 1.75 | 3.0620 | 1.6410 | 1.5310 |
Related
- Rivet Application Tables and Installation Practice per. MIL-R-47196
- Design Bolted and Riveted Joints
- Button Head Solid Head Rivet Engineering Size Chart
- Riveted Lap-Joint with Inside Cover Plate Formulas and Calculator for Stress and Strength Design
- Triple-Riveted Butt Joint Plate Formulas and Calculator for Stress and Strength Design
- Double-Riveted Butt Joint Plate Formulas and Calculator for Stress and Strength Design
- Single-Riveted Lap-Joint Equations and Calculator
- Double-Riveted Lap-Joint with Inside Cover Plate Equations and Calculator
- Acorn High Button Head Rivet Engineering Data ASME ANSI
- Pan Head Rivet Engineering Size Chart
- Oval Countersunk Head Rivet Engineering Size Chart
- Flat Countersunk Head Rivet Engineering Size Chart
Link to this Webpage:
© Copyright 2000 -
2024, by Engineers Edge, LLC
www.engineersedge.com
All rights reserved
Disclaimer |
Feedback
Advertising
| Contact
